Wall-Mounted Halogen Electric Heaters: Fast Heat, Focused Power, Easy Setup
We built these wall-mounted electric heaters for the places that need heat—fast—without eating up floor space. Think industrial spots where you want the warmth to land exactly where you need it, then get out of the way. They run on 400V and crank out 2500W, packing a lot of heat into a small package. And with a 300mm tube, the heat zone stays tight. You warm the target, not the whole room.
The practical stuff: voltage, power, and size
The 400V rating isn’t random. It lines up with the power most plants already have, so you don’t have to overthink wiring or worry about voltage drop over long runs. At 2500W, it hits operating temps quickly. That means less waiting around during production cycles. And that 300mm length? It makes coverage predictable—easy to plan into a line, easy to mount, and easy to shield when you need to keep the heat contained.
What’s inside: halogen, quartz, and an R7s connection
Inside the heater, a halogen element sits in a quartz tube. That combo handles thermal shock well, so it stays steady when it cycles on and off. A protective coating helps prevent hot spots and keeps the lamp tough enough for dirty, demanding environments. And the R7s connector makes replacement straightforward. Slide it in, wire it up, and you’re back on the line.
Where it shines—and what to keep in mind
These heaters are a natural fit mounted near blowing heads, pre-heat stations, and forming tools. The response is quick, so temperature control stays repeatable. And the design stays compact, so you’re not fighting for space. One thing to note: 2500W at 400V runs hot. Make sure your machine’s cooling and airflow are set up to handle it, so nearby components don’t get pushed past their limits.