Blomax on Focused IR Heating Point

Replacement lamp for SIG Blomax 4

Mon, 27 Jul 2026 02:21:29 +0800

Getting Your Sidel Matrix IR Lamps Just Right

Here is the problem when you swap out lamps in a Sidel Matrix or SIG Blomax 4: if the temperature curve shifts even a tiny bit, you’re in trouble. A small slip in wattage or spectral output means your preforms aren’t heating evenly. That’s how you end up with weird wall thickness or, even worse, bottles that burst. It’s a headache nobody wants. That’s why we built our replacement lamps to act exactly like the ones that came from the factory.

Replacement lamp for SIG Blomax 4/6/8/10

Sat, 18 Jul 2026 03:33:37 +0800

Can new IR lamps actually wake up an old Blomax machine?

If you’re running a SIG Blomax 4, 6, 8, or 10, you know the struggle. You spend hours tweaking the oven, but the preforms still aren’t heating evenly. You end up with wonky wall thickness and a bin full of scrap. Here’s the truth: if your lamps are old and degraded, you’re just fighting a losing battle. No amount of tuning can fix a bulb that’s lost its punch. The secret is in the heat density. We built our replacement lamps to hit the exact wattage and voltage your Blomax expects. We use shortwave infrared, which basically means the energy is concentrated in a way that PET just drinks up. The preform hits blowing temperature way faster. And when that happens? You might actually be able to shave a few seconds off your cycle time. That adds up fast. The nitty-gritty stuff. We use heavy-wall quartz glass because we don’t want the tubes bowing when things get hot. Plus, the halogen cycle keeps the tungsten filament from evaporating too quickly. This means your light output stays steady for thousands of hours, not just a few weeks. And don’t worry about the install. We use standard R7s or Sk15 connectors. They just drop right in. You won’t have to touch your control cabinet or rewire a thing. One thing to watch out for… More power is great, but it creates more waste heat in the oven housing. If you decide to go with high-output lamps on an old machine, do yourself a favor and check your cooling fans first. If your airflow is choked, you risk overheating the oven shell or warping your reflectors. Not a fun day at the office. At the end of the day, swapping out dim, tired lamps for fresh, calibrated elements is the quickest way to stop the guessing game. Once the heating is stable, you can finally stop worrying about the oven and focus on your blow pressure and timing.

Replacement lamp for SIG Blomax 10

Wed, 15 Jul 2026 12:12:13 +0800

Stop Fighting Your SIG Blomax 10 Lamps

If you’re running a Blomax 10, you know the headache. One minute everything is humming along, and the next, a tube pops. Usually, it’s thermal shock or some weakness at the pinch seal that kills them. It’s frustrating. That’s exactly why we built our replacement lamps. We didn’t want to reinvent the wheel; we just wanted to make a version that actually lasts. They’re drop-in replacements, so they fit right into your OEM footprint without any fuss. Let’s talk heat. To get those PET preforms to stretch just right, you need precise heat density. We’ve matched our lamps to your existing voltage and wattage exactly. They hit operating temperature fast, which is great for your flow. But here is a pro tip:**keep your cooling fans clean.**These lamps put out a lot of heat. If your airflow is choked up with dust, you’re going to burn out the ends of your tubes way too soon. Simple as that. Built to take a beating Standard quartz lamps are fragile. Between the constant mechanical vibration and the rapid heating and cooling cycles, they just snap. We fixed that by using reinforced quartz glass and a tougher internal filament support. It stops the filament from sagging or breaking when things get hot. We also precision-machined the connectors. Why? Because loose fits cause electrical arcing, and arcing kills lamps. Ours fit tight. What this actually means for your day Less time spent swapping out dead tubes. More time actually running production. Plus, since the spectral output stays consistent, you can stop messing with your oven settings every time a lamp starts to age. You just wire them in, calibrate your heat zones once, and leave it alone. Sure, they cost a bit more upfront than the generic stuff. But when you factor in how much downtime you’re cutting out, they usually pay for themselves in a couple of months. It’s just a better way to run your line.